After you have dried the carpet you will have

23. března 2018 v 2:33
It might be that a number of extraction passes is required to wash off the soil and the detergent. After having used a vacuum cleaner you will have to use dense foam on the carpet with the help of a mechanical brush. After some time the solution will have to be removed by washing it with hot water.

After this the compound would have to be used through the carpet fro extraction of the soil and dirt that is gathered there. After using a vacuum cleaner over the carpet the next step is to take a dry absorbent compound (that comprises a little water, solvent and detergent) and spread it in a uniform manner over the carpet. After the carpet becomes dry the vacuum cleaner would have to be used again to ensure that the compound has been removed completely form the carpet.The Institute of Inspection, Cleaning and Restoration Certification (IICRC) mention that the objective of carpet cleaning is to extricate soil particles that might be present there.

The choice of a cleaning method is dependant upon the type of carpet that is used, the purpose for which the carpet is used and the condition of the same when it is ready for cleaning. When the machine agitates, it extricates the soil from the carpet and gets absorbed by the pad. After this clean the carpet using an centrifugal pump Manufacturers absorbent pad which is in turn attached to a pad drive on a low speed rotary floor machine. The drying time for this method is 1 to 3 hours. After some dwell time you will have to use a carpet extractor to extricate the foam and the soil that is there in the carpet.

The drying time of this extraction method is 30 to 45 minutes. After you have dried the carpet you will have to use a vacuum cleaner to remove any remaining residue that is there in the carpet. This method is also referred to as dry cleaning method because no water is used. Though there are different carpet cleaning extraction processes you will have to know which one would work best for you. After you have used the vacuum cleaner on the carpet, you will have to spread a detergent solution on the carpet using a pump up sprayer and allow it to settle there. There are a total of four cleaning methods that are generally used for cleaning carpets: bonnet cleaning method; absorbent compound method; dry foam cleaning method and hot water extraction method. After using a vacuum cleaner on the carpet, spread a detergent solution on the carpet. While cleaning you must also keep checking the condition of the bonnet as the accumulation of soil there would not allow a proper extraction process. Using fans or a dry bonnet would help to speed up the process.
 

Buď první, kdo ohodnotí tento článek.

Nový komentář

Přihlásit se
  Ještě nemáte vlastní web? Můžete si jej zdarma založit na Blog.cz.
 

Aktuální články

Reklama