Clean all parts of the valve thoroughly removing

15. března 2018 v 2:36
The purpose of having a yard sprinkler system is to make less work for you. To locate these valves, your first step is to start back at the beginning. You can choose to read up on how to fix these matters yourself, or you can save yourself some time and call in the pros. Sometimes, however, they can be buried underground. Find the main sprinkler systems supply line.

Once you finally locate your valves it is time to get to work. This waterline can sometimes be located in your house, and sometimes it may be located at its own separate pump and well that supplies the water for the system. They either get stuck, thus allowing the water to run non-stop until it is manually shut off; or, they end up doing the opposite and do not turn on at all, block any water flow. Clean all parts of the valve thoroughly removing any bugs or dirt you see and then put it back together. There are options you can try to fix sprinkler valves. The sprinkler valves usually lie just beyond this split, and can be easy to locate. They can also simply weep, which is a small but never ending leak that can do some serious damage.

If the valves are indeed buried underground, you can start by looking for green or black valve boxes in your yard. If you cannot locate a box, you can contact your sprinkler installer, or even get out your old trusty metal detector to sweep the ground looking for the buried sprinkler valves. Valves issues usually present in a few recognizable ways. It should move easily and be springy; if it is not, it may need to be replaced. With a little hard work, you can get your sprinklers back up and running again! . It makes the task of keeping the lawn watered totally automated. If the valve is not turning on or is not shutting off then it is very likely that some debris has gotten lodged in it. You will need to take it apart carefully and clean each piece.

All you have to think about is how good your green grass is looking! However, what happens when something goes wrong? You will then have the tricky task of locating, cleaning, and fixing the sprinkler valves. If you have cleaned every part of the sprinkler valves and they are still not working properly, it may be a bad solenoid, bad wiring or even a ruined diaphragm. Once you have found that main line, you just follow it until you get to the area where it splits and you see multiple waterlines.

If weeping is the case it might be time to call in a professional to fix your sprinkler valves. When your sprinklers synchronous motor are working, they really do save you a lot of time. Start by removing the solenoid (usually a black box with wires sticking out) and then check the plunger beneath it. These are often located in flowerbeds or near the sprinkler controller so it may be best to start looking in those spots.
 

Buď první, kdo ohodnotí tento článek.

Nový komentář

Přihlásit se
  Ještě nemáte vlastní web? Můžete si jej zdarma založit na Blog.cz.
 

Aktuální články

Reklama